DENIM DYE LINE LT2
|
Builder
|
RAMALLUMIN. Year 2001
|
|
Feeding
|
Three-phase 400 V c.a., inverter drive
|
|
Maximun working height
|
1800 mm
|
|
Nominal working height
|
1500 mm
|
|
Maximun dyeing speed
|
25 m/minute
|
MACHINE EQUIPMENT
No. 01 Beam supporting creel with 12 positions
Ø Maximun diameter 1400 mm, beam height 1500 mm
No. 01 Warp draw calender
No. 12 AISI 304 dyeing tanks
Ø No. 08 with maximun squeezing of Kg 10.000
Ø No. 04 with maximun squeezing of Kg 5.000
Ø No. 11 tanks are provided with heating coils
No. 11 Set of oxidation cylinders with 22 m of air exposition
No. 01 Continuous steamer with 25 m drawing-in
No. 03 AISI 304 rinsing tanks
Ø No. 01 with maximun squeezing of Kg 10.000
Ø No. 02 with maximun squeezing of Kg 5.000
No. 01 Vertical dryer with 6 teflon cylinders with a 800 mm diameter, maximum steam pressure of 5 bar
No. 01 Hydraulic drive yarn accumulator on wet thread with a capacity of 120 mt
No. 01 Horizontal pre-dryer with 7 teflon cylinders with a 800 mm diameter, maximum steam pressure of 5 bar
No. 01 AISI 304 sizing box
Ø maximun squeezing of Kg 1.500
Ø Direct and indirect heating with a maximum steam pressure of 1,5 bar
No. 01 Final horizontal dryer with 11 cylinders with a 800 mm diameter
Ø N. 05 made with teflon
Ø All of them fed with a maximum steam pressure of 5 bar
No. 01 Pneumatic yarn accumulator for dry threads with a capacity of 20 m
No. 01 Thread divider with a possibility of maximum 13 separations
No. 01 Warp beaming head
Ø Maximum warp beaming height of 2.500 mm
Ø Maximum beam diameter of 1.200 mm
Ø Maximum warp beaming tension of Kg 600
No. 01 Size cooking plant consisting of
Ø No. 01 800 litre preparer tank
Ø No. 01 1000 litre cooker tank
Ø No. 01 1500 litre storage tank
TECHNICAL INTERVENTION TO RESTORE THE MACHINE INITIAL CONDITIONS
Available equipment from the LT1:
- No. 6 10 ton tanks
- No. 2 5 ton tanks
- No. 4 10 ton tanks with a width of 2250 mm
- The 10 ton tanks which were mounted at the machine entrance listed on the layout at no.19 and no. 20 are 2150 mm wide
- No. 60 finned cylinders for the oxidation ranges
- The carpentry for the 6 oxidation ranges is complete
- No. 13 finned cylinders for compensation
- Dry store room with structure and 20 smooth cylinders
- Vertical dryer with structure and 6 cylinders
- Vertical dryer with structure and 8 cylinders
The above listed components are to be overhauled and repaintedhe LT2. To mount them it is necessary to:
- Partially modify the carpentry and the platforms
- Re-build the fluid system – steam, condensation, water, air, draining in general –
- Assembling of new 7,5 kW c.a. draw engines
- Complete on board electrical system
- To modify the general switchboard by adding 4 7,5 kW inverters and to substitute the 3 5.5 kW inverters with 7,5 kW ones.
- General rewiring for the functioning in sequence and synchronizing of the whole machine
Building of a new colour kitchen and of a new chemical station
SALES CONDITIONS OF THIS PROJECT
DELIVERY : Immediate
LOCATION : ITALY
VOLTAGE : 380 Volts with 3 Phase and 50 Hertz
Best regards
Photos:
Linea Tintura LT2_ITV (3).jpg (322,98 kb)
Linea Tintura LT2_ITV (4).jpg (318,19 kb)
Linea Tintura LT2_ITV (5).jpg (315,44 kb)
Linea Tintura LT2_ITV (7).jpg (325,44 kb)
Linea Tintura LT2_ITV (8).jpg (312,73 kb)
Linea Tintura LT2_ITV.JPG (345,64 kb)
![[KickIt]](http://www.dotnetkicks.com/favicon.ico)
![[Dzone]](http://www.dzone.com/favicon.ico)
![[Digg]](http://www.digg.com/favicon.ico)
![[Reddit]](http://www.reddit.com/favicon.ico)
![[del.icio.us]](http://www.delicious.com/favicon.ico)
![[Facebook]](http://www.facebook.com/favicon.ico)
![[Technorati]](http://www.technorati.com/favicon.ico)
![[Google]](http://www.google.com/favicon.ico)
![[StumbleUpon]](http://www.stumbleupon.com/favicon.ico)
Tags: finishing machinery, dyeing
