Oct032012

129US - DENIM DYE LINE LT2

Published by Admin at 12:33 PM under Dyeing | Finishing machinery

DENIM DYE LINE LT2

Builder	RAMALLUMIN. Year 2001
Feeding	Three-phase 400 V c.a., inverter drive
Maximun working height	1800 mm
Nominal working height	1500 mm
Maximun dyeing speed	25 m/minute

MACHINE EQUIPMENT

No. 01 Beam supporting creel with 12 positions

Ø Maximun diameter 1400 mm, beam height 1500 mm

No. 01 Warp draw calender

No. 12 AISI 304 dyeing tanks

Ø No. 08 with maximun squeezing of Kg 10.000

Ø No. 04 with maximun squeezing of Kg 5.000

Ø No. 11 tanks are provided with heating coils

No. 11 Set of oxidation cylinders with 22 m of air exposition

No. 01 Continuous steamer with 25 m drawing-in

No. 03 AISI 304 rinsing tanks

Ø No. 01 with maximun squeezing of Kg 10.000

Ø No. 02 with maximun squeezing of Kg 5.000

No. 01 Vertical dryer with 6 teflon cylinders with a 800 mm diameter, maximum steam pressure of 5 bar

No. 01 Hydraulic drive yarn accumulator on wet thread with a capacity of 120 mt

No. 01 Horizontal pre-dryer with 7 teflon cylinders with a 800 mm diameter, maximum steam pressure of 5 bar

No. 01 AISI 304 sizing box

Ø maximun squeezing of Kg 1.500

Ø Direct and indirect heating with a maximum steam pressure of 1,5 bar

No. 01 Final horizontal dryer with 11 cylinders with a 800 mm diameter

Ø N. 05 made with teflon

Ø All of them fed with a maximum steam pressure of 5 bar

No. 01 Pneumatic yarn accumulator for dry threads with a capacity of 20 m

No. 01 Thread divider with a possibility of maximum 13 separations

No. 01 Warp beaming head

Ø Maximum warp beaming height of 2.500 mm

Ø Maximum beam diameter of 1.200 mm

Ø Maximum warp beaming tension of Kg 600

No. 01 Size cooking plant consisting of

Ø No. 01 800 litre preparer tank

Ø No. 01 1000 litre cooker tank

Ø No. 01 1500 litre storage tank

TECHNICAL INTERVENTION TO RESTORE THE MACHINE INITIAL CONDITIONS

Available equipment from the LT1:

No. 6 10 ton tanks
No. 2 5 ton tanks
No. 4 10 ton tanks with a width of 2250 mm
The 10 ton tanks which were mounted at the machine entrance listed on the layout at no.19 and no. 20 are 2150 mm wide
No. 60 finned cylinders for the oxidation ranges
The carpentry for the 6 oxidation ranges is complete
No. 13 finned cylinders for compensation
Dry store room with structure and 20 smooth cylinders
Vertical dryer with structure and 6 cylinders
Vertical dryer with structure and 8 cylinders

The above listed components are to be overhauled and repaintedhe LT2. To mount them it is necessary to:

Partially modify the carpentry and the platforms
Re-build the fluid system – steam, condensation, water, air, draining in general –
Assembling of new 7,5 kW c.a. draw engines
Complete on board electrical system
To modify the general switchboard by adding 4 7,5 kW inverters and to substitute the 3 5.5 kW inverters with 7,5 kW ones.
General rewiring for the functioning in sequence and synchronizing of the whole machine

Building of a new colour kitchen and of a new chemical station

SALES CONDITIONS OF THIS PROJECT

DELIVERY : Immediate

LOCATION : ITALY

VOLTAGE : 380 Volts with 3 Phase and 50 Hertz

Best regards

Photos:

Linea Tintura LT2_ITV (3).jpg (322,98 kb)

Linea Tintura LT2_ITV (4).jpg (318,19 kb)

Linea Tintura LT2_ITV (5).jpg (315,44 kb)

Linea Tintura LT2_ITV (7).jpg (325,44 kb)

Linea Tintura LT2_ITV (8).jpg (312,73 kb)