lug252013

170US - DYEING AND FINISHING MACHINES

Published by Admin at 17.36 under Dyeing

DYEING AND FINISHING MACHINES

 

DYEING AND FINISHING MACHINES (1).pdf (46,42 kb)

DYEING AND FINISHING MACHINES (2).pdf (134,29 kb)



[KickIt] [Dzone] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tags:

E-mail | Permalink | Trackback | Post RSSRSS comment feed 0 Responses

lug222013

169US - ZINSER RINGSPINNING PLANT

Published by Admin at 12.16 under Various (wool)

n.1 Intersecting SANT'ANDREA Mod.CSN + ARM

- Feeding creel  12 couplings by Bobbins + Extra cans

- Delivery 1 sliver in 1 can 700x1000 

- Oiling device on the creel

- Inverter

- Year 1996

- Serial Nr. M44..

 

n.1 Intersecting SANT'ANDREA Mod.CSN

- Feeding creel  10 couplings by Cans

- Delivery 2 slivers in 1 can 700x1000 

- Inverter

- Year 1996

- Serial Nr. M44..

 

 

n.1 Intersecting Sant’Andrea Mod. SH 24 

- Disk Head

- Feeding creel  10 couplings by Cans

- Delivery 4 slivers in 2 cans  700x1000 

- Inverter

- Year 1996

- Serial Nr. M45.. 

 

n.1 Finisher Sant’Andrea Mod.RF4/B

- n.24 Bobbins

- Tube 330 mm

- Feeding creel 24 Cans

- Automatic tube loader 

- Automatic doffing

- PLC  Inverter

- Year 2002

- Serial Nr. M1F..

 

 

N. 5 Zinser spinning frame mod. RM 450 linked with Murata 7-V

- n.624 spindles Each

- Single-control

- Ring diam. 50 mm

- Gauge 75 mm.

- Tube length 260 mm.

- Pneumatic draft SKF PK 6000

- Caddy automatic doffing system

- N.2 Machines with Feeder for Lycra Pinter

- n.1 Magitex overhead cleaner

- Inverter

- Serial N. 209.. 97/11/5294

                 209.. 97/11/5294

                 209.. 97/11/5294

                 209.. 97/11/5294-1  with Lycra Pinter

                 209.. 97/11/5294-1  with Lycra Pinter

- Year of construction 1998/2000

LINKED WITH:

Winding machine Murata 7-V

- n.20 heads Each

- n.3 Machines Pitch 4” (125 mm)

- n.2 Machines Pitch 6” (152 mm)

  conical drum 2 revolutions’ variable step

- conicity 4°20’

- n.1 auto-doffing trolley

- Electronic clearers Peyer 551

- Splicer with prism 3D6

- Computer MMM

 

- Serial N. 985X317..-001 

                 985X317..-002

                 985X317..-003

                 985X333..-001

                 985X333..-002

- Year of construction 1998/2000

  

 

N. 3 Zinser spinning frame mod. 421 E linked with Murata 7-V

- n.600 spindles Each

- Single-control

- Ring diam. 50 mm

- Gauge 75 mm.

- Tube length 260 mm.

- Pneumatic draft SKF PK 6000

- Caddy automatic doffing system

- Feeder for Lycra Pinter

- n.1 Magitex M overhead cleaner for ring frame and winder

- Inverter

- Serial N. 53.. 95/11/3477

                 53.. 95/11/3477

                 53.. 95/11/3477

- Year of construction 1996

LINKED WITH:

Winding machine Murata 7-V

- n.20 heads Each

- grooved drum 2 revolutions’ variable step with pitch 6” (152 mm)

- Kit Arm for Pitch 4” soleil

- Kit Arm for Pitch  6” (152 mm) conicity cylindrical

- n.1 auto-doffing trolley

- basket doffing for 4” and 6”

- Electronic clearers Peyer 551

- Splicer with prism 3D6

- Computer MMM

- Steaming device Murata 7C9

- Serial N. 95X3647.-001

                 95X3647.-002

                 95X3647.-003 (currently cylindrical cone 6”)

- Year of construction 1996

 

 

N. 2 TDS SAVIO Mod.2.28

- n.210 Spindles Each

- 2 Independent sided

- Feeding 2x4" (200 mm.)

- Max. Bobbin at feeding Diam.185 mm.

- Delivery 6"(152 mm.)

- Conicity 4°20’

- Pneumatic Thread-in

- Yarn Reserve

- Trolley Blower Magitex

- Year1994

 

Photos:


IMG_4779.jpg (59,72 kb)

IMG_4781.jpg (52,38 kb)

IMG_4782.jpg (65,79 kb)

IMG_4784.jpg (60,69 kb)

IMG_4786.jpg (67,31 kb)

IMG_4787.jpg (58,16 kb)

IMG_4790.jpg (55,59 kb)

IMG_4869.jpg (63,52 kb)

IMG_4860.jpg (85,25 kb)

IMG_4861.jpg (56,09 kb)



[KickIt] [Dzone] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tags:

E-mail | Permalink | Trackback | Post RSSRSS comment feed 0 Responses

lug192013

168US - 3 COMPLETE SPINNING PLANTS

Published by Admin at 17.42 under Complete spinning plants

We have available two plants:

- 16,960  spindles

- 9. 072 spindles

These are in our property.

If you are interested, we can see them together and discuss the price if seriously interested.

We also have a third plant of 10,000 spindles. Available in Italy that is not owned by us but is for sale. -

That's all I have for sale


 

 

 COMPLETE COTTON SPINNING PLANT - 9.072 SPINDLES -

 

-       NO. 02 MARZOLI BALE PLUCKER MOD. B 12 E

-       NO. 02 MARZOLI B 160

-       NO. 02 MARZOLI MIXDER MOD. B 143

  • 4 CELLS WITH CAGE

-       NO. 08 MARZOLI OPENERS MOD. B 35

  • WORKING WIDTH 1200 MM - COMPLETE WITH CHUTE FEEDING SYSTEM AND CAGE

-       NO. 02 JOSSI .

-       NO.02 METAL DETECTOR

-       NO. 16 MARZOLI CARDS MOD. CX 300

  • COMPLETE WITH CHUTE FEEDING SYSTEM MOD. B 136
  • 40” EXIT CAN, WITH PROGRAMMER SYSTEM MB 90 – AUTOLEVELLER LOEPFE SLT 4

-       NO. 04 VOUK DRAW-FRAMES MOD. SH 2 DCCEE

  • FIRST PASSAGE WITH 40” INLET CANS – 40” EXIT CANS - CREEL TYPE VL 8X40”

-       NO. 03 VOUK DRAW FRAMES MOD. SH802 DCC / E

  • SECOND PASSAGE WITH 40” INLET CANS - 24” X 48” EXIT CANS, AUTOLEVELLER USTER, CREEL TIPO VA 8 X 40”

-       NO. 04 MARZOLI ROVING FRAMES MOD. BC 16

  • 96 SPINDLES EACH, INTEGRAL AUTOMATIC DOFFING, DRAFTING SKF PK 1500 , SHORT CRADLE FOR COTTON, BOBBIN 6” X 16”, T 3 PROGRAMMER

-       NO. 09 MARZOLI LINK CONERS MOD. NSF L- LINKED WITH SCHLAFHORST 238 :

  • NSF L : 1008 SPINDLES, RING … MM , GAUGE 75 MM, TUBE 260 MM , SHORT CRADLE – DRAFTING SKF PK 265 ( 1247472 ) INVERTER , MARZOLI T 3 PROGRAMMER, MAGITEX BLOWER
  • AUTOCONER MOD. 238: NO. 24 HEADS , FRAME WITH NO. 30, EXIT 6” 1°20 , ASYMMETRICAL 2 TURNS CYLINDER, USTER    CLEARERS MK C 30 AC , SPLICER, NO. 1 DOFFING CARRIAGE, MAGITEX BLOWER. NO DOFFING SYSTEM.
  • NOTE: ALL THE RING FRAMES ARE EQUIPPED WITH “CAIPO” FLAMER AND “PINTER ” YEAR 1999/2000

YEARS  1990/ 1995.-

 

SPARE PARTS              : All the machine will be sold with the related spare parts

                                                and accessories available  in the mill.

 

DESCRIPTION OF EQUIPMENT

The refrigeration system is composed of TRANE chiller compressor equipped with:

- Compressors from about 500 KW of power;

- R134 refrigerant;

- Saving of 325 liters;

- Condenser tube bundle with: interior tubes with water volume of 488 liters, the outer tubes

refrigerant with volume of 1400 liters.

The groups are constructed in the year 1993 with the exception of some elements replaced in later years.

The cooling water is realized with n. 4 groups of cooling towers of the CCT

Evapco model AT 8 from 15 kw with fan and parcels filling plastic materials.

Were not found in the archives of the plant and projects business technical documentation

accompanying the machinery.

 

There are two heat Generators diathermic oil.

year 1998.

Model PT3000 E. - 3.000.000 Kcal / h.

Complete with electrical panel. -

Complete with air preheaters.

With an air compressor to power 3kw. –


 

 

 

COMPLETE MILL. 10.000 spindles   - suitable for cotton fine count


Years  of manufacture: from 1984 up  1997

 

BLOWROOM

01 RIETER bale plucker model A 1/2 , working widht 2.300 mm, canne lenght 25 meters, with metal detector

02 MARZOLI opener model B 32 with Cage condenser B 41, carded beater

01 MARZOLI feeder  model B 10 / 1 without conveyor belt, working widht 1.000 mm 

01 RIETER openers model ERM B 5 / 5

01 TRUTZSCHLER model GBRA 1.000, working width 1.000 mm, conveyor belt length 2 meters

01 TRUTZSCHLER Mixer MPM 8, working widht 1.400 mm

01 RIETER model B 4/1

01 MARZOLI mixer model B 142, with cage condenser model B 41/1, 4 cels 

CARDING SECTION   

03 MARZOLI cards model C 300, MARZOLI  B 136 C chute feed , central suction, exit can 40”x48”, web king, fix flats

01 MARZOLI cards model CX 300, MARZOLI  B 136 C chute feed , central suction, exit can 40”x48”, web king, fix flats

04 MARZOLI cards model C 40, MARZOLI  B 135 chute feed with cage condenser B 41/1, central suction, exit can 40”x48”, web king, fix flats

03 MARZOLI cards model C 40, MARZOLI  B 136, central suction, exit can 24”x48”, web king, fix flats, Uster card Control 2 autoleveller 

DRAWING FRAMES

01 VOUK draw frames model SH 2, exit can 18” X 48”

05 VOUK draw frames model SH 2/ DE, exit can 20” X 48”, VA creel 8 ply

01 VOUK draw frames model SH 2 / DE, exit can 24” X 48”

01 VOUK draw frames model VSM, exit can 20” X 48”, 2 creel VA typ

SIMPLEX (ROVING FRAMES)

02 MARZOLI simplex model BCX 16, spindle nr 96, SKF PK 1500, Murao cleaner, T5 programm, Magitex, spool 6” x 16”, automatic doffing 

RING SPINNING   SECTION

10 ZINSER model 319 SL, nr 1.000 spindles, SKF PK 235 (961633), tube height 260 mm, gauge 75 mm, ring diam 48 mm, Magitex, Covemat, short cradle, machines with Amsler slubbier type STG 4000 year 2001, nr.02 machine with Pinter System for Lycra 

WINDERS

01 MURATA winder mode 7 7,  nr 60 heads, splicer G2Z, waxer, Loepfe TK 740 clearers, nr 2 doffer, right side, 3 feeders, 2 turns drums, exit 6”4°20, Magitex blower, MMM MK8

01 MURATA winder mode 7 2, nr 60 heads, splicer G1, waxer, Uster Polymatic clearers, nr 2 doffer, left side, 3 feeders, 2 turns drums, exit 6”4°20, Magitex blower, MMM MK7

01 MURATA winder mode 7 2,  nr 24 heads, splicer G2, waxer, Uster Polymatic MKC 15 MC B 3 clearers, nr 1 doffer, left side, 1 feeder, 2 turns drums, exit 6”4°20, Magitex blower, MM36 MK7 

PRESS

02 Horizontal presses make Italiana presse with automatic binding , bale weight 200 KG (around), feeding by 2 Faser Compactor 

LABORATORY

Uster Tester  3

 

Delivery       :  Ready

Location: :      Italy

Conditions :   All the machines are still erected on the mill floor.

Inspection  :  to be organized at  least 4/5 days in advance

Voltage        : 380.3.50 Hz

 

 

 

 

 

 

COMPLETE COTTON SPINNING PLANT – 16.960 SPINDLES -

02 B12 MARZOLI automatic bale plucker
Year 1997

Working width 2300 mm.

Lattice lenth 27.100

54 bales lay down each side 

02 B21/ 4 MARZOLI permanent magnet

Year 1997

Feeding tube deam. 300 mm 

01 FA 390  JOSSI Metal detector

Year 1997

Feeding tube deam 300 mm.

Complete with  his descarge  box for detected metals 

01 B92/6 MARZOLI  3 way distributor

Year 1997

Pneumatic device

Feeding tube 300 mm

Exit tubes 300 mm. 

02 B142 MARZOLI multimixer with 4 cells

Year 1997

Four photocells min./max . feed controll

Working width 1200 mm

Pneumatic fiber removal

Frequency inverter in the control Panel 

01 HP.20  MARZOLI Extraction fan

Year 1997

03 B41 MARZOLI Cage condenser

Year 1996

Working width 1.000 mm.

Horizontal position            

Predisposed for B34 opener 

03 B34 MARZOLI Horizontal Opener

Year 1996

Working  width 1200 mm.

Porcupine Beater

Permanent magnet in exit

Main motor drive Frequency inverter ( fitted into the B95/4 Control Panel)  

01 B92/6 MARZOLI  3 way distributor

Year 1997

Feeding tube 300 mm

Exit tubes 300 mm. 

02 B142 MARZOLI multimixer with 4 cells

Year 1997

Working width 1200 mm

Pneumatic fiber removal

Frequency inverter on board 

01 HP.15 MARZOLI Extraction fan

Year 1997 

03 B41 MARZOLI Cage condenser

Year 1997

Working width 1.000 mm.

Horizontal positio 

03 B34 MARZOLI Horizontal Opener

Year 1997

Working width 1200 mm

Kirshner beater with 3 lines of pinned rug

Permanent magnet in exit

Main motor drive Frequency inverter  ( fitted into the B95/4 Control Panel ) 

01 B95 MARZOLI sinottic control panel

Year 1997

Complete panel  for the opeing  line and cards 

02 B151 MARZOLI Feeding fan  for carding line

Year 1997

Main moto 7,5 HP 

02  FA320 JOSSI spark detector

Year 1997 

20 B136 MARZOLI chute feeds for card

Year 1996/1997

Working width 1.000 mm.

Centralized waste collection

Frequency inverterters on board 

20 CX300 MARZOLI hioght production cards

Year 1996/1997

Feeding by B136 chute feed

Working width 1.000 mm.

Likeri-in deam 350 mm.

Under likering fix carding segment

Trash master and carding Segment Hollinsworth

Revolving flats

Drafting for cotton

LOPFE SLT-4 Autoleveller fitted in the control panel ( long and short terms)

Centralized waste collection intermittent and splitted

Singole delivery with coiler RD MARZOLI  drived with belt

Exit cans 40” x 45” ( 1020mm. x 1200 mm.)

Automatic cans change pneumatic

Safty covers CE approved

Main motor with  brakes 

04 ACS 15 MAGITEX  Travelling cleaner 

for carding machine complete with rails

Year 1997

10 SH1-D VOUK Drawing frames

Year 1996/7

Feeding cans with cans of 40” x 45” ( 1020 mm. x 1200 mm. )

VA creel for parallel cans

08 coupling for the creel

Single delivery

Pneumatc  drafting device

Drafting  gauge 180 mm.

Exit cans 40” x 45” ( 1000 mm. x 1200 mm.) wheels included

Pneumatic cans changer

DCC device with 5 cans in stand by and one in working position 

05 SH802 VOUK Drawing frames

Year 1997

Feeding cans with cans of 40” x 45” ( 1000 mm. x 1200 mm. )

VA crell for parallel cans

08 coupling each head

Two deliveries

Pneumatic drafting device

Drafting  gauge 180 mm.

USTER electronic autoleveller  ( long term only )

Mod. USTER ADC E2

Exit cans 24” x 45” ( 600 mm. x 1200 mm.) wheels included

Pneumatic cans changer

DCC device with 5 cans in stand by and one in working position 

06 BCX 16  MARZOLI Roving frames

Year 1996/7

Feeding creel for cans of 24” x 45” ( 600 mm. x 1200 mm.)

30 trolly for the cans transport ( 4 cans each trolly)

Photocells in entry and exit

Drafting device SKF PK 1500

12 spindles each machine

3 over 3

Medium cradle SKF

Bottom rollers  bearing are SKF

Suspended Flyes

Top cleares device

Bobbin of  6” x 16” mm. ( 152,4 mm. x 406.6 mm.)

Integrated automatic doffing device

Predispoded for UTIT transport  device 

06 ACS18 B  MAGITEX Travelling cleaner

Year 1996/97

Complete with rails ance central collection box 

06 UTIT –WAGNER roving transport circuit

Complete with cleaning and tube revoelving station

Year 1997

20 NSF-L MARZOLI Rings spinning frames

Year 1996/1997

Creel for  roving bobbin of 6” x 16” ( 152,4 mm. x 406.6 mm.)

Bobbin holders Marzoli with internal Brakes

6 lines of bobbins

FANI  Sliver Stop feeding  device model SENSORFIL

Drafting device 3 over 3

SKF pendular Arms model SKF PK 2025

Yarn suction spindle by spindle

Spindle gauge Gauge 75 mm.

Spindles lift 220 mm.

848 spindles each machine

Tube lift 260 mm.

Rings deam  mm. diam. Flange 1 made by BORGOSESIA/BREACKER

Anti ballon deam

Spindles drived by tangential Belts ( one each side )

Centralized waste collection under ducting

Distance between  the centers ot the machine 2700 mm.

Frequency inverter conversion  (made in year 2002 ) on board to drive the  main motor

Integrated automatic doffing with caddy ( Marco Polo )

 

OPTIONAL DEVICE FITTED ON EACH SPINNING FRAMES:

CAIPO electronic slub device Mod. 1510 from 1998 /2004 

20 ACS36 F MAGITEX Travelling cleaner

Year 1997

Complete with rails and linked with collection in the spinning end stock

01  SNAKE UTIT  automatic and electronic roving spool feeder

With automatic selection of  the position

20 UTIT – WAGNER  SNAKE roving transport circuit

Year 1997 

20 AC238 SCHLAFHORST Cone winding machine

Year 1997

Model GKU

All the machine Right hand

Feeding by link feeder SCHLAFHORST

Frames of 30 spindles each

26 head fitted on the frame

With out Waxing device

Splicer Schalfhorst DZ

Drums  in stain less steel with 2 Turns symmetric type

Drum type 146-011.462 UG 2 SY 034 ( 2 turns symmetric )

6” traverse

Take up  4º20 conicity

USTER D5 CLEARERES

Detaching head MK-C30 AC

Air descarge into the  floor 

20 ACS 18  MAGITEX Travelling cleaner

Year 1996

Complete with rails and  centralized  collection into the spinning frames 

01 UTIT – WAGNER Pallets an n packing robot

20 pallets positions for the automatic pallet formatio

01  SIPI ELECTRONIC Scale station

With labeling and wrap   zone of the readymade pallets  

ACCESSORIES FOR THE PLANT :

CRESPI GIUSEPPE  40 “X 45” HPDE White cans  for card with pantograph

CRESPI GIUSEPPE  40 “X 45” Fiber  Red cans  for card with pantograph

CRESPI GIUSEPPE  40 “X 45” Fiber  Yellow cans  for card with pantograph

CRESPI GIUSEPPE  24” X  45”HPDE White cans  with spring and plate

CRESPI GIUSEPPe  24” X  45”HPDE White cans  with spring and plate

plastic roving tubes in different colours

plastic spinning tubes

GRAF wire mounting machine year 2000

GRAF electronic  linear grinding machine Year 2000

GRAF card clothing brush motorized year 2000

 

SALES CONDITIONS OF THIS PROJECT

DELIVERY                    : Immediate

LOCATION                  : Europe,Italy

VOLTAGE                    : 380/400 Volts with  3 Phase and 50 Hertz

STATUS  OF THE  MACHINES  :  Stopped.

SPARE PARTS              : All the machine will be sold with the related spare parts

                                           and accessories available  in the mill.



[KickIt] [Dzone] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tags:

E-mail | Permalink | Trackback | Post RSSRSS comment feed 0 Responses

lug192013

168US - 3 COMPLETE SPINNING PLANTS

Published by Admin at 17.42 under Complete spinning plants

We have available two plants:

- 16,960  spindles

- 9. 072 spindles

- 10.000 spindles

These are in our property.

If you are interested, we can see them together and discuss the price if seriously interested.

That's all I have for sale


 

 

 COMPLETE COTTON SPINNING PLANT - 9.072 SPINDLES -

 

-       NO. 02 MARZOLI BALE PLUCKER MOD. B 12 E

-       NO. 02 MARZOLI B 160

-       NO. 02 MARZOLI MIXDER MOD. B 143

  • 4 CELLS WITH CAGE

-       NO. 08 MARZOLI OPENERS MOD. B 35

  • WORKING WIDTH 1200 MM - COMPLETE WITH CHUTE FEEDING SYSTEM AND CAGE

-       NO. 02 JOSSI .

-       NO.02 METAL DETECTOR

-       NO. 16 MARZOLI CARDS MOD. CX 300

  • COMPLETE WITH CHUTE FEEDING SYSTEM MOD. B 136
  • 40” EXIT CAN, WITH PROGRAMMER SYSTEM MB 90 – AUTOLEVELLER LOEPFE SLT 4

-       NO. 04 VOUK DRAW-FRAMES MOD. SH 2 DCCEE

  • FIRST PASSAGE WITH 40” INLET CANS – 40” EXIT CANS - CREEL TYPE VL 8X40”

-       NO. 03 VOUK DRAW FRAMES MOD. SH802 DCC / E

  • SECOND PASSAGE WITH 40” INLET CANS - 24” X 48” EXIT CANS, AUTOLEVELLER USTER, CREEL TIPO VA 8 X 40”

-       NO. 04 MARZOLI ROVING FRAMES MOD. BC 16

  • 96 SPINDLES EACH, INTEGRAL AUTOMATIC DOFFING, DRAFTING SKF PK 1500 , SHORT CRADLE FOR COTTON, BOBBIN 6” X 16”, T 3 PROGRAMMER

-       NO. 09 MARZOLI LINK CONERS MOD. NSF L- LINKED WITH SCHLAFHORST 238 :

  • NSF L : 1008 SPINDLES, RING … MM , GAUGE 75 MM, TUBE 260 MM , SHORT CRADLE – DRAFTING SKF PK 265 ( 1247472 ) INVERTER , MARZOLI T 3 PROGRAMMER, MAGITEX BLOWER
  • AUTOCONER MOD. 238: NO. 24 HEADS , FRAME WITH NO. 30, EXIT 6” 1°20 , ASYMMETRICAL 2 TURNS CYLINDER, USTER    CLEARERS MK C 30 AC , SPLICER, NO. 1 DOFFING CARRIAGE, MAGITEX BLOWER. NO DOFFING SYSTEM.
  • NOTE: ALL THE RING FRAMES ARE EQUIPPED WITH “CAIPO” FLAMER AND “PINTER ” YEAR 1999/2000 

YEARS  1990/ 1995.-

 

SPARE PARTS              : All the machine will be sold with the related spare parts

                                                and accessories available  in the mill.

  

DESCRIPTION OF EQUIPMENT

The refrigeration system is composed of TRANE chiller compressor equipped with:

- Compressors from about 500 KW of power;

- R134 refrigerant;

- Saving of 325 liters;

- Condenser tube bundle with: interior tubes with water volume of 488 liters, the outer tubes

refrigerant with volume of 1400 liters.

The groups are constructed in the year 1993 with the exception of some elements replaced in later years.

The cooling water is realized with n. 4 groups of cooling towers of the CCT

Evapco model AT 8 from 15 kw with fan and parcels filling plastic materials.

Were not found in the archives of the plant and projects business technical documentation

accompanying the machinery.

 

There are two heat Generators diathermic oil.

year 1998.

Model PT3000 E. - 3.000.000 Kcal / h.

Complete with electrical panel. -

Complete with air preheaters.

With an air compressor to power 3kw. –


 

 

 

COMPLETE MILL. 10.000 spindles   - suitable for cotton fine count


Years  of manufacture: from 1984 up  1997

 

BLOWROOM

01 RIETER bale plucker model A 1/2 , working widht 2.300 mm, canne lenght 25 meters, with metal detector

02 MARZOLI opener model B 32 with Cage condenser B 41, carded beater

01 MARZOLI feeder  model B 10 / 1 without conveyor belt, working widht 1.000 mm 

01 RIETER openers model ERM B 5 / 5

01 TRUTZSCHLER model GBRA 1.000, working width 1.000 mm, conveyor belt length 2 meters

01 TRUTZSCHLER Mixer MPM 8, working widht 1.400 mm

01 RIETER model B 4/1

01 MARZOLI mixer model B 142, with cage condenser model B 41/1, 4 cels 

CARDING SECTION   

03 MARZOLI cards model C 300, MARZOLI  B 136 C chute feed , central suction, exit can 40”x48”, web king, fix flats

01 MARZOLI cards model CX 300, MARZOLI  B 136 C chute feed , central suction, exit can 40”x48”, web king, fix flats

04 MARZOLI cards model C 40, MARZOLI  B 135 chute feed with cage condenser B 41/1, central suction, exit can 40”x48”, web king, fix flats

03 MARZOLI cards model C 40, MARZOLI  B 136, central suction, exit can 24”x48”, web king, fix flats, Uster card Control 2 autoleveller 

DRAWING FRAMES

01 VOUK draw frames model SH 2, exit can 18” X 48”

05 VOUK draw frames model SH 2/ DE, exit can 20” X 48”, VA creel 8 ply

01 VOUK draw frames model SH 2 / DE, exit can 24” X 48”

01 VOUK draw frames model VSM, exit can 20” X 48”, 2 creel VA typ

SIMPLEX (ROVING FRAMES)

02 MARZOLI simplex model BCX 16, spindle nr 96, SKF PK 1500, Murao cleaner, T5 programm, Magitex, spool 6” x 16”, automatic doffing 

RING SPINNING   SECTION

10 ZINSER model 319 SL, nr 1.000 spindles, SKF PK 235 (961633), tube height 260 mm, gauge 75 mm, ring diam 48 mm, Magitex, Covemat, short cradle, machines with Amsler slubbier type STG 4000 year 2001, nr.02 machine with Pinter System for Lycra 

WINDERS

01 MURATA winder mode 7 7,  nr 60 heads, splicer G2Z, waxer, Loepfe TK 740 clearers, nr 2 doffer, right side, 3 feeders, 2 turns drums, exit 6”4°20, Magitex blower, MMM MK8

01 MURATA winder mode 7 2, nr 60 heads, splicer G1, waxer, Uster Polymatic clearers, nr 2 doffer, left side, 3 feeders, 2 turns drums, exit 6”4°20, Magitex blower, MMM MK7

01 MURATA winder mode 7 2,  nr 24 heads, splicer G2, waxer, Uster Polymatic MKC 15 MC B 3 clearers, nr 1 doffer, left side, 1 feeder, 2 turns drums, exit 6”4°20, Magitex blower, MM36 MK7 

PRESS

02 Horizontal presses make Italiana presse with automatic binding , bale weight 200 KG (around), feeding by 2 Faser Compactor 

LABORATORY

Uster Tester  3

 

Delivery       :  Ready

Location: :      Italy

Conditions :   All the machines are still erected on the mill floor.

Inspection  :  to be organized at  least 4/5 days in advance

Voltage        : 380.3.50 Hz

 

 

 

 

 

 

COMPLETE COTTON SPINNING PLANT – 16.960 SPINDLES - 

02 B12 MARZOLI automatic bale plucker
Year 1997 

Working width 2300 mm. 

Lattice lenth 27.100 

54 bales lay down each side 

02 B21/ 4 MARZOLI permanent magnet 

Year 1997 

Feeding tube deam. 300 mm 

01 FA 390  JOSSI Metal detector 

Year 1997

Feeding tube deam 300 mm.

Complete with  his descarge  box for detected metals 

01 B92/6 MARZOLI  3 way distributor

Year 1997

Pneumatic device

Feeding tube 300 mm

Exit tubes 300 mm. 

02 B142 MARZOLI multimixer with 4 cells

Year 1997

Four photocells min./max . feed controll

Working width 1200 mm

Pneumatic fiber removal

Frequency inverter in the control Panel 

01 HP.20  MARZOLI Extraction fan

Year 1997

03 B41 MARZOLI Cage condenser

Year 1996

Working width 1.000 mm.

Horizontal position            

Predisposed for B34 opener 

03 B34 MARZOLI Horizontal Opener

Year 1996

Working  width 1200 mm.

Porcupine Beater

Permanent magnet in exit

Main motor drive Frequency inverter ( fitted into the B95/4 Control Panel)  

01 B92/6 MARZOLI  3 way distributor

Year 1997

Feeding tube 300 mm

Exit tubes 300 mm. 

02 B142 MARZOLI multimixer with 4 cells

Year 1997

Working width 1200 mm

Pneumatic fiber removal

Frequency inverter on board 

01 HP.15 MARZOLI Extraction fan

Year 1997 

03 B41 MARZOLI Cage condenser

Year 1997

Working width 1.000 mm.

Horizontal positio 

03 B34 MARZOLI Horizontal Opener

Year 1997

Working width 1200 mm

Kirshner beater with 3 lines of pinned rug

Permanent magnet in exit

Main motor drive Frequency inverter  ( fitted into the B95/4 Control Panel ) 

01 B95 MARZOLI sinottic control panel

Year 1997

Complete panel  for the opeing  line and cards 

02 B151 MARZOLI Feeding fan  for carding line

Year 1997

Main moto 7,5 HP 

02  FA320 JOSSI spark detector

Year 1997 

20 B136 MARZOLI chute feeds for card

Year 1996/1997

Working width 1.000 mm.

Centralized waste collection

Frequency inverterters on board 

20 CX300 MARZOLI hioght production cards

Year 1996/1997

Feeding by B136 chute feed

Working width 1.000 mm.

Likeri-in deam 350 mm.

Under likering fix carding segment

Trash master and carding Segment Hollinsworth

Revolving flats

Drafting for cotton

LOPFE SLT-4 Autoleveller fitted in the control panel ( long and short terms)

Centralized waste collection intermittent and splitted

Singole delivery with coiler RD MARZOLI  drived with belt

Exit cans 40” x 45” ( 1020mm. x 1200 mm.)

Automatic cans change pneumatic

Safty covers CE approved

Main motor with  brakes 

04 ACS 15 MAGITEX  Travelling cleaner 

for carding machine complete with rails

Year 1997

10 SH1-D VOUK Drawing frames

Year 1996/7

Feeding cans with cans of 40” x 45” ( 1020 mm. x 1200 mm. )

VA creel for parallel cans

08 coupling for the creel

Single delivery

Pneumatc  drafting device

Drafting  gauge 180 mm.

Exit cans 40” x 45” ( 1000 mm. x 1200 mm.) wheels included

Pneumatic cans changer

DCC device with 5 cans in stand by and one in working position 

05 SH802 VOUK Drawing frames

Year 1997

Feeding cans with cans of 40” x 45” ( 1000 mm. x 1200 mm. )

VA crell for parallel cans

08 coupling each head

Two deliveries

Pneumatic drafting device

Drafting  gauge 180 mm.

USTER electronic autoleveller  ( long term only )

Mod. USTER ADC E2

Exit cans 24” x 45” ( 600 mm. x 1200 mm.) wheels included

Pneumatic cans changer

DCC device with 5 cans in stand by and one in working position 

06 BCX 16  MARZOLI Roving frames

Year 1996/7

Feeding creel for cans of 24” x 45” ( 600 mm. x 1200 mm.)

30 trolly for the cans transport ( 4 cans each trolly)

Photocells in entry and exit

Drafting device SKF PK 1500

12 spindles each machine

3 over 3

Medium cradle SKF

Bottom rollers  bearing are SKF

Suspended Flyes

Top cleares device

Bobbin of  6” x 16” mm. ( 152,4 mm. x 406.6 mm.)

Integrated automatic doffing device

Predispoded for UTIT transport  device 

06 ACS18 B  MAGITEX Travelling cleaner

Year 1996/97

Complete with rails ance central collection box 

06 UTIT –WAGNER roving transport circuit

Complete with cleaning and tube revoelving station

Year 1997

20 NSF-L MARZOLI Rings spinning frames

Year 1996/1997

Creel for  roving bobbin of 6” x 16” ( 152,4 mm. x 406.6 mm.)

Bobbin holders Marzoli with internal Brakes

6 lines of bobbins

FANI  Sliver Stop feeding  device model SENSORFIL

Drafting device 3 over 3

SKF pendular Arms model SKF PK 2025

Yarn suction spindle by spindle

Spindle gauge Gauge 75 mm.

Spindles lift 220 mm.

848 spindles each machine

Tube lift 260 mm.

Rings deam  mm. diam. Flange 1 made by BORGOSESIA/BREACKER

Anti ballon deam

Spindles drived by tangential Belts ( one each side )

Centralized waste collection under ducting

Distance between  the centers ot the machine 2700 mm.

Frequency inverter conversion  (made in year 2002 ) on board to drive the  main motor

Integrated automatic doffing with caddy ( Marco Polo )

 

OPTIONAL DEVICE FITTED ON EACH SPINNING FRAMES:

CAIPO electronic slub device Mod. 1510 from 1998 /2004 

20 ACS36 F MAGITEX Travelling cleaner

Year 1997

Complete with rails and linked with collection in the spinning end stock

01  SNAKE UTIT  automatic and electronic roving spool feeder

With automatic selection of  the position

20 UTIT – WAGNER  SNAKE roving transport circuit

Year 1997 

20 AC238 SCHLAFHORST Cone winding machine

Year 1997

Model GKU

All the machine Right hand

Feeding by link feeder SCHLAFHORST

Frames of 30 spindles each

26 head fitted on the frame

With out Waxing device

Splicer Schalfhorst DZ

Drums  in stain less steel with 2 Turns symmetric type

Drum type 146-011.462 UG 2 SY 034 ( 2 turns symmetric )

6” traverse

Take up  4º20 conicity

USTER D5 CLEARERES

Detaching head MK-C30 AC

Air descarge into the  floor 

20 ACS 18  MAGITEX Travelling cleaner

Year 1996

Complete with rails and  centralized  collection into the spinning frames 

01 UTIT – WAGNER Pallets an n packing robot

20 pallets positions for the automatic pallet formatio

01  SIPI ELECTRONIC Scale station

With labeling and wrap   zone of the readymade pallets  

ACCESSORIES FOR THE PLANT :

CRESPI GIUSEPPE  40 “X 45” HPDE White cans  for card with pantograph

CRESPI GIUSEPPE  40 “X 45” Fiber  Red cans  for card with pantograph

CRESPI GIUSEPPE  40 “X 45” Fiber  Yellow cans  for card with pantograph

CRESPI GIUSEPPE  24” X  45”HPDE White cans  with spring and plate

CRESPI GIUSEPPe  24” X  45”HPDE White cans  with spring and plate

plastic roving tubes in different colours

plastic spinning tubes

GRAF wire mounting machine year 2000

GRAF electronic  linear grinding machine Year 2000

GRAF card clothing brush motorized year 2000

 

SALES CONDITIONS OF THIS PROJECT

DELIVERY                    : Immediate

LOCATION                  : Europe,Italy

VOLTAGE                    : 380/400 Volts with  3 Phase and 50 Hertz

STATUS  OF THE  MACHINES  :  Stopped.

SPARE PARTS              : All the machine will be sold with the related spare parts

                                           and accessories available  in the mill.



[KickIt] [Dzone] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tags:

E-mail | Permalink | Trackback | Post RSSRSS comment feed 0 Responses

lug192013

168US - 3 COMPLETE SPINNING PLANTS

Published by Admin at 17.42 under Complete spinning plants

We have available two plants:

- 16,960  spindles

- 9. 072 spindles

- 10.000 spindles

These are in our property.

If you are interested, we can see them together and discuss the price if seriously interested.

That's all I have for sale


 

 

 COMPLETE COTTON SPINNING PLANT - 9.072 SPINDLES -

 

-       NO. 02 MARZOLI BALE PLUCKER MOD. B 12 E

-       NO. 02 MARZOLI B 160

-       NO. 02 MARZOLI MIXDER MOD. B 143

  • 4 CELLS WITH CAGE

-       NO. 08 MARZOLI OPENERS MOD. B 35

  • WORKING WIDTH 1200 MM - COMPLETE WITH CHUTE FEEDING SYSTEM AND CAGE

-       NO. 02 JOSSI .

-       NO.02 METAL DETECTOR

-       NO. 16 MARZOLI CARDS MOD. CX 300

  • COMPLETE WITH CHUTE FEEDING SYSTEM MOD. B 136
  • 40” EXIT CAN, WITH PROGRAMMER SYSTEM MB 90 – AUTOLEVELLER LOEPFE SLT 4

-       NO. 04 VOUK DRAW-FRAMES MOD. SH 2 DCCEE

  • FIRST PASSAGE WITH 40” INLET CANS – 40” EXIT CANS - CREEL TYPE VL 8X40”

-       NO. 03 VOUK DRAW FRAMES MOD. SH802 DCC / E

  • SECOND PASSAGE WITH 40” INLET CANS - 24” X 48” EXIT CANS, AUTOLEVELLER USTER, CREEL TIPO VA 8 X 40”

-       NO. 04 MARZOLI ROVING FRAMES MOD. BC 16

  • 96 SPINDLES EACH, INTEGRAL AUTOMATIC DOFFING, DRAFTING SKF PK 1500 , SHORT CRADLE FOR COTTON, BOBBIN 6” X 16”, T 3 PROGRAMMER

-       NO. 09 MARZOLI LINK CONERS MOD. NSF L- LINKED WITH SCHLAFHORST 238 :

  • NSF L : 1008 SPINDLES, RING … MM , GAUGE 75 MM, TUBE 260 MM , SHORT CRADLE – DRAFTING SKF PK 265 ( 1247472 ) INVERTER , MARZOLI T 3 PROGRAMMER, MAGITEX BLOWER
  • AUTOCONER MOD. 238: NO. 24 HEADS , FRAME WITH NO. 30, EXIT 6” 1°20 , ASYMMETRICAL 2 TURNS CYLINDER, USTER    CLEARERS MK C 30 AC , SPLICER, NO. 1 DOFFING CARRIAGE, MAGITEX BLOWER. NO DOFFING SYSTEM.
  • NOTE: ALL THE RING FRAMES ARE EQUIPPED WITH “CAIPO” FLAMER AND “PINTER ” YEAR 1999/2000 

YEARS  1990/ 1995.-

 

SPARE PARTS              : All the machine will be sold with the related spare parts

                                                and accessories available  in the mill.

  

DESCRIPTION OF EQUIPMENT

The refrigeration system is composed of TRANE chiller compressor equipped with:

- Compressors from about 500 KW of power;

- R134 refrigerant;

- Saving of 325 liters;

- Condenser tube bundle with: interior tubes with water volume of 488 liters, the outer tubes

refrigerant with volume of 1400 liters.

The groups are constructed in the year 1993 with the exception of some elements replaced in later years.

The cooling water is realized with n. 4 groups of cooling towers of the CCT

Evapco model AT 8 from 15 kw with fan and parcels filling plastic materials.

Were not found in the archives of the plant and projects business technical documentation

accompanying the machinery.

 

There are two heat Generators diathermic oil.

year 1998.

Model PT3000 E. - 3.000.000 Kcal / h.

Complete with electrical panel. -

Complete with air preheaters.

With an air compressor to power 3kw. –


 

 

 

COMPLETE MILL. 10.000 spindles   - suitable for cotton fine count


Years  of manufacture: from 1984 up  1997

 

BLOWROOM

01 RIETER bale plucker model A 1/2 , working widht 2.300 mm, canne lenght 25 meters, with metal detector

02 MARZOLI opener model B 32 with Cage condenser B 41, carded beater

01 MARZOLI feeder  model B 10 / 1 without conveyor belt, working widht 1.000 mm 

01 RIETER openers model ERM B 5 / 5

01 TRUTZSCHLER model GBRA 1.000, working width 1.000 mm, conveyor belt length 2 meters

01 TRUTZSCHLER Mixer MPM 8, working widht 1.400 mm

01 RIETER model B 4/1

01 MARZOLI mixer model B 142, with cage condenser model B 41/1, 4 cels 

CARDING SECTION   

03 MARZOLI cards model C 300, MARZOLI  B 136 C chute feed , central suction, exit can 40”x48”, web king, fix flats

01 MARZOLI cards model CX 300, MARZOLI  B 136 C chute feed , central suction, exit can 40”x48”, web king, fix flats

04 MARZOLI cards model C 40, MARZOLI  B 135 chute feed with cage condenser B 41/1, central suction, exit can 40”x48”, web king, fix flats

03 MARZOLI cards model C 40, MARZOLI  B 136, central suction, exit can 24”x48”, web king, fix flats, Uster card Control 2 autoleveller 

DRAWING FRAMES

01 VOUK draw frames model SH 2, exit can 18” X 48”

05 VOUK draw frames model SH 2/ DE, exit can 20” X 48”, VA creel 8 ply

01 VOUK draw frames model SH 2 / DE, exit can 24” X 48”

01 VOUK draw frames model VSM, exit can 20” X 48”, 2 creel VA typ

SIMPLEX (ROVING FRAMES)

02 MARZOLI simplex model BCX 16, spindle nr 96, SKF PK 1500, Murao cleaner, T5 programm, Magitex, spool 6” x 16”, automatic doffing 

RING SPINNING   SECTION

10 ZINSER model 319 SL, nr 1.000 spindles, SKF PK 235 (961633), tube height 260 mm, gauge 75 mm, ring diam 48 mm, Magitex, Covemat, short cradle, machines with Amsler slubbier type STG 4000 year 2001, nr.02 machine with Pinter System for Lycra 

WINDERS

01 MURATA winder mode 7 7,  nr 60 heads, splicer G2Z, waxer, Loepfe TK 740 clearers, nr 2 doffer, right side, 3 feeders, 2 turns drums, exit 6”4°20, Magitex blower, MMM MK8

01 MURATA winder mode 7 2, nr 60 heads, splicer G1, waxer, Uster Polymatic clearers, nr 2 doffer, left side, 3 feeders, 2 turns drums, exit 6”4°20, Magitex blower, MMM MK7

01 MURATA winder mode 7 2,  nr 24 heads, splicer G2, waxer, Uster Polymatic MKC 15 MC B 3 clearers, nr 1 doffer, left side, 1 feeder, 2 turns drums, exit 6”4°20, Magitex blower, MM36 MK7 

PRESS

02 Horizontal presses make Italiana presse with automatic binding , bale weight 200 KG (around), feeding by 2 Faser Compactor 

LABORATORY

Uster Tester  3

 

Delivery       :  Ready

Location: :      Italy

Conditions :   All the machines are still erected on the mill floor.

Inspection  :  to be organized at  least 4/5 days in advance

Voltage        : 380.3.50 Hz

 

 

 

 

 

 

COMPLETE COTTON SPINNING PLANT – 16.960 SPINDLES - 

02 B12 MARZOLI automatic bale plucker
Year 1997 

Working width 2300 mm. 

Lattice lenth 27.100 

54 bales lay down each side 

02 B21/ 4 MARZOLI permanent magnet 

Year 1997 

Feeding tube deam. 300 mm 

01 FA 390  JOSSI Metal detector 

Year 1997

Feeding tube deam 300 mm.

Complete with  his descarge  box for detected metals 

01 B92/6 MARZOLI  3 way distributor

Year 1997

Pneumatic device

Feeding tube 300 mm

Exit tubes 300 mm. 

02 B142 MARZOLI multimixer with 4 cells

Year 1997

Four photocells min./max . feed controll

Working width 1200 mm

Pneumatic fiber removal

Frequency inverter in the control Panel 

01 HP.20  MARZOLI Extraction fan

Year 1997

03 B41 MARZOLI Cage condenser

Year 1996

Working width 1.000 mm.

Horizontal position            

Predisposed for B34 opener 

03 B34 MARZOLI Horizontal Opener

Year 1996

Working  width 1200 mm.

Porcupine Beater

Permanent magnet in exit

Main motor drive Frequency inverter ( fitted into the B95/4 Control Panel)  

01 B92/6 MARZOLI  3 way distributor

Year 1997

Feeding tube 300 mm

Exit tubes 300 mm. 

02 B142 MARZOLI multimixer with 4 cells

Year 1997

Working width 1200 mm

Pneumatic fiber removal

Frequency inverter on board 

01 HP.15 MARZOLI Extraction fan

Year 1997 

03 B41 MARZOLI Cage condenser

Year 1997

Working width 1.000 mm.

Horizontal positio 

03 B34 MARZOLI Horizontal Opener

Year 1997

Working width 1200 mm

Kirshner beater with 3 lines of pinned rug

Permanent magnet in exit

Main motor drive Frequency inverter  ( fitted into the B95/4 Control Panel ) 

01 B95 MARZOLI sinottic control panel

Year 1997

Complete panel  for the opeing  line and cards 

02 B151 MARZOLI Feeding fan  for carding line

Year 1997

Main moto 7,5 HP 

02  FA320 JOSSI spark detector

Year 1997 

20 B136 MARZOLI chute feeds for card

Year 1996/1997

Working width 1.000 mm.

Centralized waste collection

Frequency inverterters on board 

20 CX300 MARZOLI hioght production cards

Year 1996/1997

Feeding by B136 chute feed

Working width 1.000 mm.

Likeri-in deam 350 mm.

Under likering fix carding segment

Trash master and carding Segment Hollinsworth

Revolving flats

Drafting for cotton

LOPFE SLT-4 Autoleveller fitted in the control panel ( long and short terms)

Centralized waste collection intermittent and splitted

Singole delivery with coiler RD MARZOLI  drived with belt

Exit cans 40” x 45” ( 1020mm. x 1200 mm.)

Automatic cans change pneumatic

Safty covers CE approved

Main motor with  brakes 

04 ACS 15 MAGITEX  Travelling cleaner 

for carding machine complete with rails

Year 1997

10 SH1-D VOUK Drawing frames

Year 1996/7

Feeding cans with cans of 40” x 45” ( 1020 mm. x 1200 mm. )

VA creel for parallel cans

08 coupling for the creel

Single delivery

Pneumatc  drafting device

Drafting  gauge 180 mm.

Exit cans 40” x 45” ( 1000 mm. x 1200 mm.) wheels included

Pneumatic cans changer

DCC device with 5 cans in stand by and one in working position 

05 SH802 VOUK Drawing frames

Year 1997

Feeding cans with cans of 40” x 45” ( 1000 mm. x 1200 mm. )

VA crell for parallel cans

08 coupling each head

Two deliveries

Pneumatic drafting device

Drafting  gauge 180 mm.

USTER electronic autoleveller  ( long term only )

Mod. USTER ADC E2

Exit cans 24” x 45” ( 600 mm. x 1200 mm.) wheels included

Pneumatic cans changer

DCC device with 5 cans in stand by and one in working position 

06 BCX 16  MARZOLI Roving frames

Year 1996/7

Feeding creel for cans of 24” x 45” ( 600 mm. x 1200 mm.)

30 trolly for the cans transport ( 4 cans each trolly)

Photocells in entry and exit

Drafting device SKF PK 1500

12 spindles each machine

3 over 3

Medium cradle SKF

Bottom rollers  bearing are SKF

Suspended Flyes

Top cleares device

Bobbin of  6” x 16” mm. ( 152,4 mm. x 406.6 mm.)

Integrated automatic doffing device

Predispoded for UTIT transport  device 

06 ACS18 B  MAGITEX Travelling cleaner

Year 1996/97

Complete with rails ance central collection box 

06 UTIT –WAGNER roving transport circuit

Complete with cleaning and tube revoelving station

Year 1997

20 NSF-L MARZOLI Rings spinning frames

Year 1996/1997

Creel for  roving bobbin of 6” x 16” ( 152,4 mm. x 406.6 mm.)

Bobbin holders Marzoli with internal Brakes

6 lines of bobbins

FANI  Sliver Stop feeding  device model SENSORFIL

Drafting device 3 over 3

SKF pendular Arms model SKF PK 2025

Yarn suction spindle by spindle

Spindle gauge Gauge 75 mm.

Spindles lift 220 mm.

848 spindles each machine

Tube lift 260 mm.

Rings deam  mm. diam. Flange 1 made by BORGOSESIA/BREACKER

Anti ballon deam

Spindles drived by tangential Belts ( one each side )

Centralized waste collection under ducting

Distance between  the centers ot the machine 2700 mm.

Frequency inverter conversion  (made in year 2002 ) on board to drive the  main motor

Integrated automatic doffing with caddy ( Marco Polo )

 

OPTIONAL DEVICE FITTED ON EACH SPINNING FRAMES:

CAIPO electronic slub device Mod. 1510 from 1998 /2004 

20 ACS36 F MAGITEX Travelling cleaner

Year 1997

Complete with rails and linked with collection in the spinning end stock

01  SNAKE UTIT  automatic and electronic roving spool feeder

With automatic selection of  the position

20 UTIT – WAGNER  SNAKE roving transport circuit

Year 1997 

20 AC238 SCHLAFHORST Cone winding machine

Year 1997

Model GKU

All the machine Right hand

Feeding by link feeder SCHLAFHORST

Frames of 30 spindles each

26 head fitted on the frame

With out Waxing device

Splicer Schalfhorst DZ

Drums  in stain less steel with 2 Turns symmetric type

Drum type 146-011.462 UG 2 SY 034 ( 2 turns symmetric )

6” traverse

Take up  4º20 conicity

USTER D5 CLEARERES

Detaching head MK-C30 AC

Air descarge into the  floor 

20 ACS 18  MAGITEX Travelling cleaner

Year 1996

Complete with rails and  centralized  collection into the spinning frames 

01 UTIT – WAGNER Pallets an n packing robot

20 pallets positions for the automatic pallet formatio

01  SIPI ELECTRONIC Scale station

With labeling and wrap   zone of the readymade pallets  

ACCESSORIES FOR THE PLANT :

CRESPI GIUSEPPE  40 “X 45” HPDE White cans  for card with pantograph

CRESPI GIUSEPPE  40 “X 45” Fiber  Red cans  for card with pantograph

CRESPI GIUSEPPE  40 “X 45” Fiber  Yellow cans  for card with pantograph

CRESPI GIUSEPPE  24” X  45”HPDE White cans  with spring and plate

CRESPI GIUSEPPe  24” X  45”HPDE White cans  with spring and plate

plastic roving tubes in different colours

plastic spinning tubes

GRAF wire mounting machine year 2000

GRAF electronic  linear grinding machine Year 2000

GRAF card clothing brush motorized year 2000

 

SALES CONDITIONS OF THIS PROJECT

DELIVERY                    : Immediate

LOCATION                  : Europe,Italy

VOLTAGE                    : 380/400 Volts with  3 Phase and 50 Hertz

STATUS  OF THE  MACHINES  :  Stopped.

SPARE PARTS              : All the machine will be sold with the related spare parts

                                           and accessories available  in the mill.



[KickIt] [Dzone] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tags:

E-mail | Permalink | Trackback | Post RSSRSS comment feed 0 Responses

lug192013

167US - COMPLETE WORSTED SPINNING PLANT of n.5.760 spindles

Published by Admin at 12.00 under Complete spinning plants

COMPLETE WORSTED SPINNING PLANT  of n.5.760 spindles

 

n.1 Breaker Tow to Tops SEYDEL Mod.871

- heating plate

- Delivery 1 can 1000x1200

- Steaming device at the delivery

- Year 2000

 

n.1 Rebreaker SANT'ANDREA Mod.RST 21

- Feeding creel 24 couplings by cans

- n.4 Draft cylinders

- Delivery 1 sliver in 1 can 800x1200

- Oiling device on the creel

- Inverter

- Year 2000

 

n.1 Blending Machine SANT'ANDREA Mod. 2M

- Feeding creel 24 couplings by bobbins

+ extra cans

- n.2 Screw mixing head

- n.1 Disc reducer head

- Delivery 1 sliver in 1 can 700x1000

- Inverter

- Year 2000

 

n.1 Intersecting SANT'ANDREA Mod.ST 21

- electronic autoleveller

- Feeding creel 10 couplings bobbins + extra cans

- Delivery 1 sliver in 1 can 800x1200

- Inverter

- Year 2000

 

n.1 Intersecting SANT'ANDREA Mod.ST 21

- Feeding creel 10 couplings by Cans

- Delivery 2 slivers in 1 can 800x1200

- Inverter

- Year 2000

 

n.1 Intersecting Sant’Andrea Mod. SH 24

- Disc Head

- Feeding creel 10 couplings by Cans

- Delivery 4 slivers in 2 cans 800x1200

- Inverter

- Year 2000

 

n.1 Finisher Sant’Andrea Mod.RF5/B

- n.24 Bobbins

- Tube 330 mm

- Feeding creel 24 Cans

- Automatic tube loader

- Automatic doffing

- PLC Touch Screen

- Inverter

- Year 2004

 

N.8 Zinser spinning frame mod. RM 450 linked with Murata 7-V

- n.720 spindles Each

- Single-control

- Ring diam. 50 mm

- Gauge 82,5 mm.

- Tube length 260 mm.

- Pneumatic draft SKF PK 6000

- Automatic doffing

- Caddy automatic system for spool

- N.2 Machines with Feeding by Lycra Pinter

- Magitex overhead cleaner

- Inverter

- year of construction 2001

 

LINKED WITH:

 

N.8 Winding machine Murata 7-V

- n.24 heads Each

- n.6 Machines Pitch 4” (125 mm) Soleil

- n.2 Machines Pitch 4” (125 mm) Soleil + 6”

(152 mm) with conical drum

2 revolutions’ variable step conicity 4°20’

- n.1 auto-doffing trolley

- Electronic clearers Uster Quantum IMK O30

- Splicer with prism 3D6

- Waxing device

- Computer MMC/3

- n.2 Machines with Steaming device VAP 30

– Year 2004

- year of construction 2001

 

 

N.2 Double Twisting (2x1) frame Volkmann

mod.VTS 07 – Bauart 7.10

- n.208 Spindles Each

- Electronic head with Informator settings for

working parameters

- Individually motorized spindles

- Feeding 2x4" soleil (200 mm.)

- Max. Bobbin at feeding Diam.185 mm.

- Delivery 6"(152 mm.)

- Conicity 4°20’ Biko

- Take up package

- Pneumatic Thread-in

- Yarn Reserve

- Waxing device

- Trolley Blower Magitex

- Splicer Mesdan ATS with n.2 Jontair 115 per Side

- Year 2002

 

n.1 Automatic Cone Winder Murata 7-V

- n.40 heads

- Pitch 6”(152 mm.)

- Conicity 4°20’ biko

- Drum 2 turns variable step

- Feeding by cones with automatic Loader

- n.2 trolley for automatic doffing

- Splicer 3D4

- Electronic clearers Peyer 531

- Magitex

- Year 1999

 

LABORATORY:

 

Uster tester 3

Dynamometer Brustio

Neps Tester

Conditioning stove

Fibre Fineness Meter - Wira

Automatic Fibre Diagram Machine

Twin Tester

Electronic weighing

Attrifil Mesdan

Wrap Reel



[KickIt] [Dzone] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tags:

E-mail | Permalink | Trackback | Post RSSRSS comment feed 0 Responses

lug192013

166US - winder SAVIO ESPERO L

Published by Admin at 11.40 under Finishing machinery

n.2 Automatic cone winder SAVIO ESPERO L


- n.60 heads Each

- manual feeding by Spools ( h.230 – 260 – 280  - 300 mm)

- delivery 6" (152 mm.)

- conicity 4°20’

- drum 2 turns diam.95 mm

- electronic clearers Uster Polymatic

- splicer Mesdan 490 L or 4941

- waxing device

- n.2 automatic tube loader

- n.2 trolley automatic doffing

- cones conveyor belt

- trolley blower Magitex

- lighting

- year 1997 – 1998

 

 

Photos:

DSC02214.jpg (232,91 kb)

DSC07554.jpg (172,92 kb)

DSC07559.jpg (173,18 kb)

DSC07598.jpg (193,11 kb)

DSC07600.jpg (154,03 kb)

YARNS 003.jpg (440,24 kb)

YARNS 011.jpg (623,21 kb)

 

 

 



[KickIt] [Dzone] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tags:

E-mail | Permalink | Trackback | Post RSSRSS comment feed 0 Responses

lug082013

165US - PLANT FOR DYING

Published by Admin at 17.15 under Dyeing

Plant production 5 tons dyeing yarn packages. day of the yarn bobbins are picked automatically by the system Apollo2 Minetti carrying rods inserted into the material and then again automatically included in the 4 tanks Bellini, which is sent automatically by the system color bath-Color Service DL 28 is removed after dyeing cones and put the basket in a centrifuge Minetti, then it is dried in drying rooms 3 Minetti, there is a sampler on the ward by Ugolini 2/4 cones and relative centrifugal Galvanin. Listed as part of the ward trolleys fortresses, castles door baskets, crane, hoist the flag, BI-beam automatic trolley, towel Stalam. 

 

MACHINES:

  • UGOLINI SP 110/2-FOR DYEING 1996
  • APOLLO 2 TYPE RG OFF. MINETTI   2003
  • MINETTI PA 1800 CENTRIFUGE  1996
  • TRAVELLING CRANE TYPE GSB2  1997
  • AUTOM. CARR. ON DOUBLE BEAM  1997
  • HOISTER TYPE P  2002
  • NR.2 MINETTI S2/A DRYERS  1996
  • MINETTI S4/A DRYER  2000
  • NR. 2 BELLINI - RBNV TANKS  1996
  • NR. 2 BELLINI - RBNV TANKS  1999
  • COLOR-SERVICE DLV 28-1-20  1997
  • CENTRIFUGE GALVANIN  1995
  • MICROWAVE DRYER STALAM  1996


[KickIt] [Dzone] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tags:

E-mail | Permalink | Trackback | Post RSSRSS comment feed 0 Responses

lug042013

164US - SECOND-HAND SUZUKI SAMPLE WARPER MOD. NAS-300CS

Published by Admin at 11.36 under Finishing machinery

1 SECOND-HAND SUZUKI SAMPLE WARPER MOD. NAS-300 CS
YEAR OF CONSTRUCTION 2006

 
Complete with tensioner,

System to enable operation with both standard creel and rotational creel in one process
Rotating Creel 8 positions
Fixed creel 10 positions
Working height max 2250mm
Drum Circumference  10mtr.
Direct discharge to the beam.

Compatible  computerized system (interface /software) for pattern control and creel combination.

Beaming device : Direct beaming from warp drum

Machine in excellent conditions
Control panel

SALES CONDITIONS OF THIS PROJECT

DELIVERY    : Immediate

LOCATION    : ITALY

VOLTAGE      : 380/400  Volts with  3 Phase and 50 Hertz

 

Photos:

IMG_1564.jpg (70,06 kb)

IMG_1565.jpg (69,25 kb)

IMG_1568.jpg (75,10 kb)

IMG_1571.jpg (62,69 kb)

IMG_1572.jpg (67,29 kb)

IMG_1573.jpg (68,66 kb)



[KickIt] [Dzone] [Digg] [Reddit] [del.icio.us] [Facebook] [Technorati] [Google] [StumbleUpon]

Tags:

E-mail | Permalink | Trackback | Post RSSRSS comment feed 0 Responses