Dear Sirs,
It is to offer you, subject unsold:
DENIM DYE LINE LT2
|
Builder
|
RAMALLUMIN. Year 2001
|
|
Feeding
|
Three-phase 400 V c.a., inverter drive
|
|
Maximun working height
|
1800 mm
|
|
Nominal working height
|
1500 mm
|
|
Maximun dyeing speed
|
25 m/minute
|
MACHINE EQUIPMENT
No. 01 Beam supporting creel with 12 positions
Ø Maximun diameter 1400 mm, beam height 1500 mm
No. 01 Warp draw calender
No. 12 AISI 304 dyeing tanks
Ø No. 08 with maximun squeezing of Kg 10.000
Ø No. 04 with maximun squeezing of Kg 5.000
Ø No. 11 tanks are provided with heating coils
No. 11 Set of oxidation cylinders with 22 m of air exposition
No. 01 Continuous steamer with 25 m drawing-in
No. 03 AISI 304 rinsing tanks
Ø No. 01 with maximun squeezing of Kg 10.000
Ø No. 02 with maximun squeezing of Kg 5.000
No. 01 Vertical dryer with 6 teflon cylinders with a 800 mm diameter, maximum steam pressure of 5 bar
No. 01 Hydraulic drive yarn accumulator on wet thread with a capacity of 120 mt
No. 01 Horizontal pre-dryer with 7 teflon cylinders with a 800 mm diameter, maximum steam pressure of 5 bar
No. 01 AISI 304 sizing box
Ø maximun squeezing of Kg 1.500
Ø Direct and indirect heating with a maximum steam pressure of 1,5 bar
No. 01 Final horizontal dryer with 11 cylinders with a 800 mm diameter
Ø N. 05 made with teflon
Ø All of them fed with a maximum steam pressure of 5 bar
No. 01 Pneumatic yarn accumulator for dry threads with a capacity of 20 m
No. 01 Thread divider with a possibility of maximum 13 separations
No. 01 Warp beaming head
Ø Maximum warp beaming height of 2.500 mm
Ø Maximum beam diameter of 1.200 mm
Ø Maximum warp beaming tension of Kg 600
No. 01 Size cooking plant consisting of
Ø No. 01 800 litre preparer tank
Ø No. 01 1000 litre cooker tank
Ø No. 01 1500 litre storage tank
TECHNICAL INTERVENTION TO RESTORE THE MACHINE INITIAL CONDITIONS
Available equipment from the LT1:
- No. 6 10 ton tanks
- No. 2 5 ton tanks
- No. 4 10 ton tanks with a width of 2250 mm
- The 10 ton tanks which were mounted at the machine entrance listed on the layout at no.19 and no. 20 are 2150 mm wide
- No. 60 finned cylinders for the oxidation ranges
- The carpentry for the 6 oxidation ranges is complete
- No. 13 finned cylinders for compensation
- Dry store room with structure and 20 smooth cylinders
- Vertical dryer with structure and 6 cylinders
- Vertical dryer with structure and 8 cylinders
The above listed components are to be overhauled and repainted on the LT2. To mount them it is necessary to:
- Partially modify the carpentry and the platforms
- Re-build the fluid system – steam, condensation, water, air, draining in general –
- Assembling of new 7,5 kW c.a. draw engines
- Complete on board electrical system
- To modify the general switchboard by adding 4 7,5 kW inverters and to substitute the 3 5.5 kW inverters with 7,5 kW ones.
- General rewiring for the functioning in sequence and synchronizing of the whole machine
Building of a new colour kitchen and of a new chemical station
The lt2, already modified machine for previous needs of production, has still some mechanical weak points. Some finned cylinders, which are used for yarn deflection and in the compensators, have an undersized shaft.
The sizing box is drawn by a leather belt. To improve it a converter-driven gear motor should be installed. Different tanks should be completed with squeezing units, which at the moment are functioning as reserve for other services.
STATUS: STILL ERECTED
LOCATION: ITALY
We hope that our offer can interest you. Don't hesitate to contact us
for more details and for inspection.
Kind regards
![[KickIt]](http://www.dotnetkicks.com/favicon.ico)
![[Dzone]](http://www.dzone.com/favicon.ico)
![[Digg]](http://www.digg.com/favicon.ico)
![[Reddit]](http://www.reddit.com/favicon.ico)
![[del.icio.us]](http://www.delicious.com/favicon.ico)
![[Facebook]](http://www.facebook.com/favicon.ico)
![[Technorati]](http://www.technorati.com/favicon.ico)
![[Google]](http://www.google.com/favicon.ico)
![[StumbleUpon]](http://www.stumbleupon.com/favicon.ico)
Tags: dyeing
