apr142014

185US - SIZING MACHINE

Published by Admin at 15.04 under Finishing machinery

1 Nos SUCKER MULLER SIZING MACHINE

Year 1985 – Machine was revised in 2001
12 in working positions for beams flange diam 1000 mm , distance from flange to flange 1800 mm. 2 tanks for sizing Boxes composed of 1-LC3.
Drying area is composed of 18 total cylinders (6+6+6), 12 tefloned cylinders, width 2000 mm, 6 iron steel cylinders, width 2000 mm .
Beaming head mod WN width 4700 mm Max.working head 3,40 for beams with flange diam 1100 mm, completed with hydraulic pressure cylinders.
Mahlo electronic humidity control.
Completed with sizing kitchen

Photos:

IMG_0275.jpg (87,73 kb)

IMG_0284.jpg (117,30 kb)

IMG_0285.jpg (104,12 kb)

IMG_0286.jpg (104,99 kb)

IMG_0289.jpg (96,26 kb)

IMG_0291.jpg (80,80 kb)

IMG_0292.jpg (79,01 kb)

IMG_0300.jpg (95,22 kb)

Tags: finishing machinery

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

mar052014

182US - MURATA MACH CONER 7-5

Published by Admin at 14.35 under Finishing machinery

n.1 MURATA MACH CONER 7-5

- n.40 heads

- Pitch 6”(152 mm.)

- Conicity 4°20’ biko

- Drum 2 turns

- Feeding by cones with automatic Loader

- n.2 trolley for automatic doffing

- Splicer 3D4

- Electronic clearers Peyer 531

- Magitex

- Year 1997

(dyeing machine.)

Photos:

DSC02107.JPG (149,92 kb)

DSC02104.JPG (144,88 kb)

DSC02105.JPG (134,27 kb)

DSC02109.JPG (101,89 kb)

DSC02114.JPG (121,81 kb)

DSC02113.JPG (117,45 kb)

DSC02110.JPG (131,38 kb)

Tags: finishing machinery

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

ott082013

176US - NO. 09 MARZOLI LINK CONERS MOD. NSF L- LINKED WITH SCHLAFHORST 238

Published by Admin at 19.10 under Finishing machinery

NO. 09 MARZOLI LINK CONERS MOD. NSF L- LINKED WITH SCHLAFHORST 238 :

NSF L : 1008 SPINDLES, RING … MM , GAUGE 75 MM, TUBE 260 MM , SHORT CRADLE – DRAFTING SKF PK 265 ( 1247472 ) INVERTER , MARZOLI T 3 PROGRAMMER, MAGITEX BLOWER .- YEARS 1991

LINKED

AUTOCONER MOD. 238: NO. 24 HEADS , FRAME WITH NO. 30, EXIT 6” 1°20 , ASYMMETRICAL 2 TURNS CYLINDER, USTER CLEARERS MK C 30 AC , SPLICER, NO. 1 DOFFING CARRIAGE, MAGITEX BLOWER. NO DOFFING SYSTEM.
NOTE: ALL THE RING FRAMES ARE EQUIPPED WITH “CAIPO” FLAMER AND “PINTER ” YEAR 1999/2000

SALES CONDITIONS OF THIS PROJECT

DELIVERY : Immediate

LOCATION : ITALY

VOLTAGE : 380/400 Volts with 3 Phase and 50 Hertz

Tags: cards, finishing machinery

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

set252013

174US - 48 sets Vamatex Leonardo Rapier Looms

Published by Admin at 12.34 under Finishing machinery

N°24 VAMATEX LEONARDO Rapier Looms

Year of construction 2000, working width 210 cm; Electronic Dobby STAUBLI 2670 . 20/20/20, with 16 Levers .- nr. 08 colours, Electrical tension: 3 x 380 V 50 Hz.

04 Weft feeder LGL model SIRIO PROGRESS .- 1,5 Warp Beam flange 1000 mm.- 5000 + 5000 Heddles and droppers.

Can test functioning for each loom. In the mill floor

Sale lots, is possible

DELIVERY : Immediate

LOCATION : ITALY, Venice

VOLTAGE : 380/400 Volts with 3 Phase and 50/60 Hertz

Tags: finishing machinery

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

lug192013

166US - winder SAVIO ESPERO L

Published by Admin at 11.40 under Finishing machinery

n.2 Automatic cone winder SAVIO ESPERO L

- n.60 heads Each

- manual feeding by Spools ( h.230 – 260 – 280 - 300 mm)

- delivery 6" (152 mm.)

- conicity 4°20’

- drum 2 turns diam.95 mm

- electronic clearers Uster Polymatic

- splicer Mesdan 490 L or 4941

- waxing device

- n.2 automatic tube loader

- n.2 trolley automatic doffing

- cones conveyor belt

- trolley blower Magitex

- lighting

- year 1997 – 1998

Photos:

DSC02214.jpg (232,91 kb)

DSC07554.jpg (172,92 kb)

DSC07559.jpg (173,18 kb)

DSC07598.jpg (193,11 kb)

DSC07600.jpg (154,03 kb)

YARNS 003.jpg (440,24 kb)

YARNS 011.jpg (623,21 kb)

Tags: finishing machinery

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

lug042013

164US - SECOND-HAND SUZUKI SAMPLE WARPER MOD. NAS-300CS

Published by Admin at 11.36 under Finishing machinery

1 SECOND-HAND SUZUKI SAMPLE WARPER MOD. NAS-300 CS
YEAR OF CONSTRUCTION 2006

Complete with tensioner,

System to enable operation with both standard creel and rotational creel in one process
Rotating Creel 8 positions
Fixed creel 10 positions
Working height max 2250mm
Drum Circumference 10mtr.
Direct discharge to the beam.

Compatible computerized system (interface /software) for pattern control and creel combination.

Beaming device : Direct beaming from warp drum

Machine in excellent conditions
Control panel

SALES CONDITIONS OF THIS PROJECT

DELIVERY : Immediate

LOCATION : ITALY

VOLTAGE : 380/400 Volts with 3 Phase and 50 Hertz

Photos:

IMG_1564.jpg (70,06 kb)

IMG_1565.jpg (69,25 kb)

IMG_1568.jpg (75,10 kb)

IMG_1571.jpg (62,69 kb)

IMG_1572.jpg (67,29 kb)

IMG_1573.jpg (68,66 kb)

Tags:

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

mag212013

163US - WOOL ZINSER RING SPINNING PLANT

Published by Admin at 11.04 under Finishing machinery | Spinning

n.1 Intersecting SANT'ANDREA Mod.CSN + ARM

- Feeding creel 12 couplings by Bobbins + Extra cans

- Delivery 1 sliver in 1 can 700x1000

- Oiling device on the creel

- Inverter

n.1 Intersecting SANT'ANDREA Mod.CSN

- Feeding creel 10 couplings by Cans

- Delivery 2 slivers in 1 can 700x1000

- Inverter

n.1 Intersecting Sant’Andrea Mod. SH 24

- Disk Head

- Feeding creel 10 couplings by Cans

- Delivery 4 slivers in 2 cans 700x1000

- Inverter

n.1 Finisher Sant’Andrea Mod.RF4/B

- n.24 Bobbins

- Tube 330 mm

- Feeding creel 24 Cans

- Automatic tube loader

- Automatic doffing

- PLC Inverter

N. 5 Zinser spinning frame mod. RM 450 linked with Murata 7-V

- n.624 spindles Each

- Single-control

- Ring diam. 50 mm

- Gauge 75 mm.

- Tube length 260 mm.

- Pneumatic draft SKF PK 6000

- Caddy automatic doffing system

- N.2 Machines with Feeder for Lycra Pinter

- n.1 Magitex overhead cleaner

- Inverter

- Year of construction 1998/2000

LINKED WITH:

Winding machine Murata 7-V

- n.20 heads Each

- n.3 Machines Pitch 4” (125 mm)

- n.2 Machines Pitch 6” (152 mm)

conical drum 2 revolutions’ variable step

- conicity 4°20’

- n.1 auto-doffing trolley

- Electronic clearers Peyer 551

- Splicer with prism 3D6

- Computer MMM

- Year of construction 1998/2000

N. 3 Zinser spinning frame mod. 421 E linked with Murata 7-V

- n.600 spindles Each

- Single-control

- Ring diam. 50 mm

- Gauge 75 mm.

- Tube length 260 mm.

- Pneumatic draft SKF PK 6000

- Caddy automatic doffing system

- Feeder for Lycra Pinter

- n.1 Magitex M overhead cleaner for ring frame and winder

- Inverter

- Year of construction 1996

LINKED WITH:

Winding machine Murata 7-V

- n.20 heads Each

- grooved drum 2 revolutions’ variable step with pitch 6” (152 mm)

- Kit Arm for Pitch 4” soleil

- Kit Arm for Pitch 6” (152 mm) conicity cylindrical

- n.1 auto-doffing trolley

- basket doffing for 4” and 6”

- Electronic clearers Peyer 551

- Splicer with prism 3D6

- Computer MMM

- Steaming device Murata 7C9

- Year of construction 1996

Delivery: Immediately.

Loading: Italy

Tags: finishing machinery, spinning

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

apr032013

162US - Sectional Warper MOD. 300/3 - Taiana

Published by Admin at 10.42 under Finishing machinery

Sectional Warper MOD. 300/3.- Taiana

Year 1999.
Flange max 1250 mm
Working height 2200mm
Creel: 360 spindles.
rock-max diameter 300 mm

Included: all accessories and spare parts related with this machines existing in the original mill.

Packing: dismantling in suitable size for container loading and perfect packing and special protection for all electronic parts

Photos:

IMG_1001.jpg (54,51 kb)

IMG_1002.jpg (52,52 kb)

IMG_1005.jpg (62,05 kb)

IMG_1008 (1).jpg (59,33 kb)

IMG_1009.jpg (48,03 kb)

IMG_1010.jpg (59,28 kb)

Tags: finishing machinery

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

mar292013

161US - BENNINGER DIRECT HIGH PRODUCTION WARPER +BENNINGER SIZING MACHINE

Published by Admin at 11.32 under Finishing machinery

Nr. 01 BENNINGER DIRECT HIGH PRODUCTION WARPER MACHINES
Model ZC-R-1800 -
1800 mm width with flange diam up to 1000 mm. RPM.Max warping speed 1000 m/min
Net tension (phase-phase):3x380 V 50Hz,
BENNINGER V-creel ,714 position in work with automatic pre tensioners  .

year 1990 …Machine was revised in 2001



Nr. 01 BENNINGER SIZING MACHINE
High productive sizing range, model PROCOMAT ZELL,
Composed of:Benninger zell beams creel model for 20 fractional beams each width 1800 mm (flange to flange) , max flange diam.1000 mm ,
2 Benninger Zell size box model , cylinders width 2000 mm, working width 1800 mm each box with 2 pairs of squeezing cylinders and 2 immersion cylinder.
1 Benninger Zell compact dryer type 12 drying cylinders width 2000 mm 4+4+4 , 10 of them tefloned, diam 800 mm.
1 Benninger Zell high productive headstock/beaming model
Width 400 mm, max working width 3900 mm
Suitable for beams up to max flange diam 1100 mm
Speed from 0,4 to 125 m/min , Computerized microprocessor automatic control system.

Year 1990 …Machine was revised in 2001

LOCATION :Europe

VOLTAGE  : 380/400 Volts with 3 Phase and 50/60 Hertz

The machines are stopped

Delivery: First week of April 2013

Photos: