apr232012

069US - OMMI ELECTRONIC SCALES LOADERS + OMMI MILLING CUTTERS

Published by Admin at 12.40 under Blow room line

Dear Sirs,

We can offer the following machines that are stored in our warehouse:

-02 sets OMMI ELECTRONIC SCALES LOADERS - YOC 1996 - EXCELLENT CONDITIONS

OUTPUT: UNTIL 3000 Kgs/hours

PICTURES: attached

- 02 OMMI MILLING CUTTERS

Looking forward to hearing from you,

Best regards

Photos:

OMNI PLANT --01.jpg (39,17 kb)

OMNI PLANT --70.jpg (20,64 kb)

OMNI PLANT --78.jpg (31,03 kb)

P1020068.jpg (49,71 kb)

P1020091.jpg (45,71 kb)

P1020118.jpg (43,54 kb)

CIMG2975.jpg (58,36 kb)

Tags: blow room

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

apr192012

066US - COMPLETE LINE FOR STONE WASH

Published by Admin at 15.41 under Finishing machinery

Dear Sir,

it is to offer you a complete line for STONE WASH

The line is located in Italy and still erected on mill’s floor.

NO.	MACHINE	YEAR	WORKING	ACCESSORY
			WIDTH

	DYEING

1	HORIZONTAL WASHER	1998	KG.240/140	LOADERS
	OMI MOD. LCO 650 M.0080			AUTOMATIC
				UNLOADING

1	HORIZONTAL WASHER	1998	KG.240/140	LOADERS
	OMI MOD. LCO 650 M.0081			AUTOMATIC
				UNLOADING

1	HORIZONTAL WASHER	1998	KG.240/140	LOADERS
	OMI MOD. LCO 650 M.0082			AUTOMATIC
				UNLOADING

1	HORIZONTAL TUMBLING WASHER	1998	KG. 240	LOADERS
	OMI MOD. LCSO 650			AUTOMATIC
				UNLOADING

1	PUMICE STONE SEPARATOR	1998	KG. 140	LOADERS
	OMI MOD. SPR 1200			AUTOMATIC
				UNLOADING

1	STEAM ROTATING DRYER	2000	KG. 240	LOADERS
	OMI MOD. ER 950			AUTOMATIC
				UNLOADING

the production of the stone wash plant:

- 3 HORIZONTAL WASHERS: KG.240/140 CYCLE

- 1 HORIZONTAL TUMBLING WASHER: KG.240 CYCLE

- 1 STONE DETACHING SYSTEM: KG. 140 CYCLE

- 1 STEAM REVOLVING DRYER: KG. 240 CYCLE

Should you be interested, please freely contact us for further information

Looking forward to hearing from you,

Best regards

Tags: finishing machinery

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

apr112012

064US- BENNINGER MERCERIZING LINE MOD. ML2 LH (width 2000 mm - m speed 30 m / min) – YEAR OF MANUFACTURE 2008

Published by Admin at 12.27 under Finishing machinery

Dear Sir,

it is to offer you, subject unsold:

BENNINGER MERCERIZING LINE MOD. ML2 LH (width 2000 mm - m speed 30 m / min) – YEAR OF MANUFACTURE 2008

consisting of:

INLET GROUP SYSTEM

PRE-SOAKING GROUP

SOAKING, 2 SECTIONS

STABILIZER SECTION

WASHING TANK

NEUTRALIZATION TANK

WASHING TANK

EXIT TANGENTIAL ROLLER

DRIVING AND CHECKING ELECTRICAL BOARDS

ELECTRIC SWITCHBOARD PANELS, COMMAND AND CONTROL ONES

STATUS: STILL ERECTED

LOCATION: ITALY

Looking forward to hearing from you,

Kind regards

Photos:

HPIM1780.jpg (56,78 kb)

HPIM1781 (1).jpg (55,00 kb)

HPIM1781.jpg (55,00 kb)

HPIM1782.jpg (48,50 kb)

Tags: finishing machinery

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

mar202012

048US-SANGIACOMO (KNITTING) MACHINES MODEL UNIVERSAL

Published by Admin at 11.40 under Knitting

NOS. 44 SANGIACOMO (KNITTING) MACHINES MODEL UNIVERSAL

Years: 1984/87/89/90/91/92/93/97

Diameter nos. 42 x 4,5 - nos. 2 x 4,0

Gauge 18

Needles: nos. 42 machines: nos. 96 needles - nos. 2 machines: nos. 84 needles

Production 24/h: nos. 800/850 various articles (short, long, with sponge and without sponge)

PICTURES: Please find attached some pictures with samples of socks and machines, spares, scales, lifts.

LOCATION: ITALY

STATUS: plant is still running

Photos:

DSC04213.jpg (35,57 kb)

DSC04222.jpg (65,44 kb)

DSC04224.jpg (74,31 kb)

DSC04226.jpg (76,25 kb)

DSC04231.jpg (40,74 kb)

DSC04234.jpg (44,79 kb)

DSC04248.jpg (138,16 kb)

DSC04250.jpg (163,09 kb)

DSC04255.jpg (144,74 kb)

DSC04256.jpg (131,60 kb)

DSC04299.jpg (51,49 kb)

Tags: knitting

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

mar202012

046US- O.E. PLANT OF 1296 ROTORS

Published by Admin at 10.45 under Open End complete plant

O.E. PLANT OF 1296 ROTORS

Type of worked yarn: acrylic, viscose, polyester-cotton, 100% cotton.

Opening Line

N. 02 TRUTZSCHLER Feeders BOB 1200 (lattice 2500 mm) with opener RST (complete with condenser)

N. 02 DUST SEPARATOR

N. 02 TRUTZSCHLER OPENING MACHINE MOD. “ASTA 600”

N. 01 TRUTZSCHLER BOA 046 (lattice 2000 mm)

N. 01 OPENER TRUTZSCHLER TVF1 (1200 mm)

N. 01 BOC 046 TRUTZSCHLER

N. 01 RST (1200 mm)

N. 08 TRUTZSCHLER CARDS DK 740

autoleveller, exit can 24”x 45”

chute feed

380 v 50 hz

N. 03 VOUK Draw frames mod. SH802 – year 1997

With autoleveller

Exit can 18x42

Coiler 18”

Creel to 12 coupling

2 machines with electronic drafting – 1 machine with mechanical drafting

N. 03 SCHLFHORST O.E. SE9 – years 1997/1998

machines with 192 rotors.- ACO 288

Uster Polyguard clearers NK C20 12

Exit 1° 20 .- 6”( 152 mm )

Electronical tester.-

Rotors for machines diam. 46 mm. ( 33mm)

Type of rotor BD 242 S – combing roller S 21 DN – nozzle KN 4.-double carriage -

waxing .

N. 03 SCHLFHORST O.E. SE9 – years 1994/1998

ACO 288 and 240

machines with Rotors 240 each

Uster Polyguard clearers NK C15 20.-

Exit 1° 20 .- 6”( 152 mm)

Electronical tester.-

Rotors for machines diam. 46 mm.( 33 mm.)-

Type of rotor BD 242 S – combing roller S 21 DN –nozzle KN 4 nr.- 1 and double carriage -

waxing .

Counts from Ne 6 to Ne30 – (1.100 Kgs machines with 192 rotors,

1.300 Kgs machines with 240 rotors).

Presses, laboratory, packaging line are to be supplied with the plant. + SPARE PARTS .

Sale Conditions :
Delivery : immediate
Payment : 20 % down payment do be done immediately- 80 % LC.-

Machines still erected to the mill floor – location North of Italy

Looking forward to hearing from you,

Photos:

CARDE DK 740 - 01.jpg (26,78 kb)

CARDE DK 740 - 02.jpg (35,32 kb)

CARDE DK 740 - 03.jpg (41,91 kb)

CARDE DK 740 - 04.jpg (24,02 kb)

CARDE DK 740 - 05.jpg (49,83 kb)

CARDE DK 740 -- 06.jpg (38,22 kb)

CARDE DK 740 - 11.jpg (37,88 kb)

CARDE DK 740 - 15.jpg (21,11 kb)

CARDE DK 740 - 16.jpg (42,16 kb)

CARDE DK 740 - 19.jpg (18,79 kb)

CARDE DK 740 - 20.jpg (41,35 kb)

CARDE DK 740 - 29.jpg (35,59 kb)

P1020243.jpg (39,47 kb)

CIMG3118.jpg (28,17 kb)

CIMG3125 (33).jpg (24,39 kb)

CIMG3127.jpg (38,67 kb)

CIMG3131 (35).jpg (68,88 kb)

CIMG3136 (40).jpg (31,85 kb)

CIMG3138 (42).jpg (49,58 kb)

IMG_3844.jpg (41,69 kb)

IMG_3791.jpg (31,97 kb)

IMG_3792.jpg (27,81 kb)

IMG_3793.jpg (25,48 kb)

IMG_3794.jpg (47,94 kb)

IMG_3803.jpg (33,88 kb)

Tags: open end

E-mail | Permalink | Trackback | Post RSS RSS comment feed 0 Responses

mar202012

039US- BENNINGER SIZING MACHINE

Published by Admin at 10.33 under Finishing machinery

Dear Sirs,

Please note that we can offer:

DESCRIPTION MACHINERY FOR SALE

N°01- BENNINGER fractional warpers	Model	BEN DIRECT
	year		2004
	Serial number
	Working width	2400 mm.
	Flange beam diam. max.	1250 mm.
	Dust aspiration	CLEANVAC
CREEL	Model	a V ,
	Positions	720
	Cones diam max	300 mm.
	Tubes evacuation device	TRASTECNICA
N°01- BENNINGER SIZING MACHINE	Model	BEN SIZETEC
	year	2004
	Serial number
	n.1-Fix creel for beams from 24 positions of fractional beams with flange diam. 1225mm. working width internal flange to flange 2400 mm.
	n. 2 - size boxs with pre-wet tanks , and separate tank with double set of double squizing
	n. 2 -zones of separating of warp yarns in wet condition.
	n. 1- Dryer with 14 cylinders
	n. 1 – Head Beaming of high production
	Working width max 4000 mm.
	Beams with flange of diam 1100 mm.
	n. 1- Electronic system control for automatic processing